Consumer Defined Control Feature - KENMORE ELITE 790.75503 Manual De Uso

Consumer
Defined
Control Feature
FEATURE OVERVIEW
• Lockout (Child Resistant
Lock)
• Temperature
Conversion
• Other Displays
Control Lockout
Lockout allows the oven controls only to be locked. This feature allows cleaning of the control panel without
accidentally activating the oven.
Lockout can be set or cancelled by pushing BAKE TIME and STOP TIME
simultaneously for a second. During this mode, depressing any button results in the
word "OFF" being displayed for 2 seconds.
While in Lockout mode, the display will show the current time of day.
Temperature Conversion (Fahrenheit/Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. To change the temperature to
°C (Celsius) or from °C to °F:
1. Push CONV. Bake/Roast and set the oven temperature to 500°F/260°C or
more using the UP or DOWN ARROW.
2. Push CONV. Bake/Roast within the next 2 seconds for 3-4 seconds. A beep
sounds and a number appears in red to the right of the display. For the
conversion, "1" must be displayed. If another number is displayed, push
CONV. Bake/Roast and select "1".
3. Push the UP or DOWN ARROW to change °F to °C or °C to °F in the display.
4. Push CLEAR OFF to confirm your choice.
Other Displays
When proceeding through steps 1 and 2 in the Temperature Conversion or in
the elimination of the 12-hour Shut-off time limit, two other words can be
displayed. One is ESC with a red 0 which cannot be changed; the other one is USE
or SALE with a red 2 which is for factory use.
INSTRUCTIONS
INSTRUCTIONS
12
DISPLAY
DISPLAY