Sabbath Feature
For energy conservation, the Electronic Oven Control has been set at the factory to allow you to program the oven a
maximum of 12 hours in advance (except during timed bake). The Sabbath Feature allows you to program the oven more
than 12 hours in advance. To set the sabbath feature:
1. Push CONV. Bake/Roast and set the oven temperature to 500°F/260°C or
more using the UP ARROW.
2. Push CONV. Bake/Roast within the next 2 seconds for 3-4 seconds. A
beep sounds and a number appears in red to the right of the display. For
the conversion, "3" must be displayed. If another number is displayed,
push CONV. Bake/Roast and select "3".
3. Push the UP or DOWN ARROW to change from 12 hour to 9999 in the
display, for no 12 hour shut-off.
4. Push CLEAR OFF to confirm your choice.
Other Displays
When proceeding through steps 1 and 2 in the Temperature Conversion or in
the elimination of the 12-hour Shut-off time limit, two other words can be
displayed. One is ESC with a red 0 which cannot be changed; the other one is
USE or SALE with a red 2 which is for factory use.
INSTRUCTIONS
13
Consumer
Defined
Control Feature
FEATURE OVERVIEW
• Sabbath Feature
• Other Displays
DISPLAY