Operating The Appliance - FAURE FKM-801MP1 Manual Del Usuario

OPERATING THE APPLIANCE

Speed regulator
Timing display
Speed 0-8
Led
Switch
1. Power plug connected to the power supply and press the
powerswitch (8), the speed show "0»and the time show "00:00».
2. When the speed show «0»,if the consumer forget to turn off the power switch, 5 minutes the LED will no
display and the machine return to standby mode automatically.
3. Turn the knob CW one time,the speed rise 1(0-8),opposite turn the knob CCW one time ,the speed
4. In each speed turn the knob CW keep 3 seconds,speed no change,the second again, timing recover.
All the reset will be clearing when press the power switch (8) or pull out the power plug. Turn the speed
to 0 when the machine is working, timing no be 0 clearing, equivalent to suspend the machine then
timing recover when it resumes work.
5. In each speed ,turn the knob CCW keep 3 seconds, timing will be 0 clearing and reset. After turn off
the timing,this operation is invalid.The level will falling 1 in this opertion some times.
6. The drive arm (4) is upwards or pull upward the drive arm(4) when the machine is working, speed will
return to 0. Timing no 0 clearing if the machine is working ,After pull down the drive arm and the
timing will recover ,but the speed need to reset(B).
A B
9
GB
Time
Knob