Agilent Technologies TwisTorr 304 FS AG Manual De Instrucciones página 251

Where:
P = XXX W is the current power supplied to the pump
T = XX °C is the current temperature of the pump
XXXX Hz is the current frequency of rotation of the pump. This
value is set by default to 1010 Hz but can be modified by the user
according to needs, proceeding as described in the
"PROGRAMMING" paragraph. The unit of measurement (HZ /
Krpm, default = Hz) is selected by the user from the
INPUT/OUTPUT->SPED menu.
If the SOFT-START function (PUMP SETTING menu '
SOFTSTART is active and the pump is ramping, indication of the
speed of rotation is replaced with a bar-graph that indicates the
soft-start step in course and the total number of steps to be
performed. On completion of the soft-start ramp, the bar-graph
is replaced with indication of the frequency of rotation of the
pump
Pressing twice, the following is obtained:
N O
I
Where:
NORMAL: indicates the operating regime of the pump
XXXHz: see description "Pressing once" Measures key
I=X.XXA: indicates the current absorbed by the pump
V= XXX V: indicates the pump driving voltage
Pressing 3 times, the following is obtained:
P =
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01 (C)
R M A L
= X . X X
X X X W
X . X X E
Technical Information
How to Use by Front Panel
X X
A V = X
X X
- Y Y m B
17
X X H z
X X V
X X H z
a R
251/301