Replacing The Waterfilter; Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN HW 400 Manual De Instrucciones

14.2.2

Replacing the waterfilter

1. Open the tank cover and take out the box
with the old waterfilter.
2. Soak the new waterfilter upright in water for
10 min.
3. Rinse the new waterfilter thoroughly under
running water.
4. Remove the old waterfilter and replace it
with the new waterfilter (see fig.). Therefor
take out the filter box, place the new
waterfilter and pull it down from the bottom.
1 lid of water tank
2 water tank
3 filter box
4 waterfilter

15 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device incorrectly
and to ensure trouble-free operation.

15.1 Safety information

Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the unit, cord or plug in water or other liquids and do not place in the
dishwasher.
► Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.

15.2 Cleaning

1. Remove the plug from the outlet and let the device cool down.
2. To maintain the performance of the device, descale the appliance at least once a month. If
you use a CASO water filter and change it as regular as described in "replacing the
waterfilter" you do not need to descale the appliance.
3. Add some vinegar into the water and operate the appliance (without waterfilter) three
times. The scale will be removed. After that, pour out the water in the water tank.
4. Do not clean the main machine. Only wipe it with a damp cloth.
Attention
32