Troubleshooting & Warranty - Singer Intelligent Pro Steam Press Manual De Instrucciones

PROBLEM
Unit fails to heat up and steam.
Power Indicator Light does not
illuminate.
Unit fails to heat up and steam.
Power Indicator Light does
illuminate.
Steam Burst output is weak or
intermittent.
This electrical appliance complies with directive 2002/96/EC (Waste Electrical and Electronic
Equipment – WEEE).
The meaning of the crossed-through waste bin symbol on the appliance is the
product must be disposed of separately to other household waste at the end of
the useful life of the appliance. The user is responsible for delivering appliance
to an appropriate collection center at that time.
Appropriate separate collection for environment-friendly treatment and recycling prevents or
reduces harmful effect on the environment and human health. You can obtain information on
available collection services in your area by contacting your local Council waste collection
department, or the retailer from which you bought the appliance.
LIMITED WARRANTY
IMPORTANT: SAVE THIS DOCUMENT AND KEEP IT IN A SAFE PLACE!
The Intelligent Pro Steam Press is warranted to be free from defects in material and work-
manship.
The warranty for the Intelligent Pro Steam Press's wiring and electronic parts is for a period
of one (1) year from the date of purchase.
The warranty for all other parts of the Intelligent Pro Steam Press is for a period of ninety (90)
days from the date of purchase.
If the electronic parts and/or the other parts in the Intelligent Pro Steam Press, after inspec-
tion by SINGER, prove to be defective during the applicable warranty period(s), the electronic
parts and/or the other parts will be repaired or replaced at SINGER's option, without charge,
except for any expense associated with sending the Intelligent Pro Steam Press to SINGER.
If SINGER sends a replacement Intelligent Pro Steam Press, it will carry the remaining war-
ranty of the original Intelligent Pro Steam Press.
10 – ENGLISH
Troubleshooting & Warranty
POSSIBLE CAUSE
Unit is not plugged in.
Household Circuit Breaker/Ground
Fault Interrupter has tripped or
blown a fuse.
Auto Shut-Off has engaged.
Water Tank is empty.
Unit is damaged or malfunctioning.
Pressing Plate needs to be
cleaned.
SOLUTION
Plug into electrical outlet.
Reset Circuit Breaker/Ground Fault
Interrupter, or replace fuse. If you need
assistance, contact a licensed electrician.
Refer to Auto Shut-Off section of this
manual for proper procedure.
Refill Water Tank using procedures
found in this manual.
Immediately cease usage and contact our
Consumer Support Department.
Refer to Cleaning section of this
manual for proper procedure.