NATURAL DISCHARGE Fig.3
1) Anti-wind (blowback) chimney
Type "B11" appliances are supplied upon request with chimney or chimney and anti-wind (blowback) device to be
assembled and delivered separately.
With appliances which have two cooking areas (FT-78G, FT-712G), it is possible to diversify the temperature in the
two halfs of the hotplate, or to use only one half.
Use the appliance only under surveillance.
Attention: The cutting and sharping utensils damage the chromed plate.
Daily cleaning after switching off the appliance ensures the perfect functioning and long life of the appliance. The parts
in steel must be cleaned with a detergent-soaked cloth without rubbing; after that, rinse with clean water and dry with a
dry cloth. If the surface of the hotplate is not used for some time, it must be covered with a fine film of oil.
Do not use abrasive or corrosive detergents.
WHAT TO DO IN THE EVENT OF BREAKDOWN
Turn off the gas tap and notify the after sales service.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
Turn off the gas tap, clean the installation as specified above.
GB
IE
OBSERVATIONS AND ADVICE
CLEANING AND MAINTENANCE
SOME TIME
33
FORCED DISCHARGE Fig.4
1) Extractor hood
2) Interlocking