How To Use - Panasonic ER‑GY60 Instrucciones De Funcionamiento

How to use

• Apply the oil to the blade before and after each use.
(See page 18.)
• The appliance may not operate in an ambient
temperature lower than approximately 0 °C.
• Please clean the appliance after each use.
(See pages 16 and 17.)
<Note before trimming>
• Make sure that the main body is turned off.
• Check that the blades are not damaged or deformed
before use.
<Note before beard trimming>
• Do not use with shaving foam applied or when the
beard is wet.
A wet beard may stick to the skin or bunch up, making
it difficult to trim.
• Before trimming, comb your moustache with a comb.
Trimming dry hair
1
Select the desired attachments, then press the
power switch to turn on the power and trim.
• Use the appropriate attachment as needed.
It can also be used without the attachment.
<Trimming beard>
● Without the attachment (See page 14.)
● Trimming height comb attachment for beard
(See page 15.)
● Detail trimming attachment (See page 15.)
<Trimming body hair>
● Without the attachment (See page 14.)
● Trimming height comb attachment for body hair
(See page 15.)
● Skinguard attachment (See page 16.)
2
Turn off the switch after use.
Trimming wet hair
• Do not use the attachment when trimming wet hair.
1
Wet and apply soap to your body.
2
Press the power switch to turn on the power
and trim.
<Trimming body hair>
● Without the attachment (See page 14.)
3
Apply less pressure than you
would when trimming dry hair,
and move the main body in a
gliding motion.
4
Turn off the switch after use.
13