Human Touch Reflex PRO Manual De Uso Y Cuidado página 4

get ready
humantouch.com
1. Plug it in
Plug the power cord into an appropriate power source.
2. Power on
Turn the master power switch (on the rear of the massager) to On.
3. Position your foot and calf massager in front of your favorite chair.
4. Take a seat.
4
Adjust the massager angle.
Push the angle adjust lever forward, then use your feet
to adjust the massager angle as desired. Pull the angle
adjust lever backward to lock it into position.
Angle adjust
NOTE: Follow the below steps to remove your feet from the unit in
the event of a power failure:
1. Lift your knees upward (Fig. 1).
2. Rotate your feet sideways and ease them out (Fig. 2).
Sitting or standing on your foot and calf massager could result in personal injury and or permanent damage to the massager.
Your foot and calf massager
fully assembled. Simply plug it in,
take a seat, adjust the angle, and
you're set to go!
Fig. 1 Fig. 2
5
comes