Össur OH5 Knee Instrucciones Para El Uso página 9

Description
Fitted height
Weight
Ground clearance
Proximal connection Pyramid
Distal connection
Swing phase
Stance phase
Axes
Flexion angle
without socket
ASSEMBLY OF THE PROXIMAL CONNECTION
OH5 Knee with a pyramid adapter
• Slide the washers (37 & 38) onto the 40 mm central screw (36), guide the screw through the central opening in
the head of the joint (25) and tighten the pyramid adapter (39) to a torque of 35 Nm.
• Secure the 40 mm central screw (36) with Loctite and use a torque wrench (8 mm Allen key).
OH5 Knee with an IKF adapter
• Slide the washers (37 & 38) onto the 27 mm central screw (34), guide the screw through the central opening in
the head of the joint (25) and tighten the IKF adapter (43) to a torque of 35 Nm. Make sure that you assemble
the IKF adapter (43) in the correct AP direction.
• Secure the 27 mm central screw (34) with Loctite and use a torque wrench (8mm Allen key).
Selecting and inserting the buffer elements
The set is supplied with four buffers
• 3 back (P) progressive buffers (with holes)
• 1 front (A) stop buffer (without holes)
Back buffers (with holes)
Dark blue X-Soft
Yellow Soft
Red Medium
Brown Hard
Blue X-Hard
Front buffer (without hole)
Brown Standard
Blue X-Hard
The hardness of the buffers must be selected and inserted to suit the patient's requirements.
OH5 Knee with
pyramid adapter
approx. 17 mm
approx. 830 g
approx. 12 mm
Integrated 30 mm
tube receiver
Hydraulic system
Closing geometry
Polycentric
approx. 150°
Available as an accessory
Supplied with set
Premounted
Supplied with set
Available as an accessory
Premounted
Available as an accessory
OH5 Knee with IKF
adapter
approx. 32 mm
approx. 965 g
approx. 12 mm
Pyramid
Integrated 30 mm
tube receiver
Hydraulic system
Closing geometry
stance flexion
Polycentric
approx. 150°
KH5 Knee with loop
adapter
approx. 26 mm
approx. 850 g
approx. 12 mm
Loop adapter
Integrated 30 mm
tube receiver
Hydraulic system
Closing geometry
Polycentric
approx. 150°
KH5 Knee with
3-arm socket
adapter
approx. 26 mm
approx. 930 g
approx. 12 mm
3-arm socket
adapter
Integrated 30 mm
tube receiver
Hydraulic system
Closing geometry
Polycentric
approx. 150°
9