OPERATION
6
OPERATION
Control Panel and Display
1
2
1
Safety Standby light (red)
2
Power button
3
Fan Speed control button
4
Humidity display
5
Humidity control button
6
Timer button
7
Check Filter light
8
Filter Reset button
9
Bucket Full light
10
Auto Defrost light
11
Timer On light
12
Fan Speed indicator lights
12
3
4
After 23 hours of continuous operation, the red lamp
lights up for 1 hour.
Starts and stops the product.
Adjusts the fan speed and air volume.
Displays the current humidity (25-90%) and the
humidity setting (30-80%).
Adjusts the humidity setting. Desired humidity levels
can be set in 5-percent increments from 30-80%.
Sets a time for the product to automatically turn off.
Press the button repeatedly to increase the time until
shutoff in 1-hour increments up to 12 hours.
Lights up after 350 hours of operation. Check and
clean the filter.
After cleaning the filter, press for three seconds to
reset operating time.
Lights up when drain water bucket is full.
Lights up when the product is defrosting.
Lights up when the Timer function is set.
Light up to indicate fan speed (High/Low).
10
9
5
11
6
7
8