NetSpa ASPEN Guia De Instalacion Y De Utilizacion página 27

3.3. Assembling
1) Install the base protector to where
you want to install your spa and pull
out the straps.
4) Connect the inflation hose to the
pump on the socket .
7) Inflate the inflatable spa for about
10 minutes. Ensure that the spa is
firmly inflated.
10) Put the sock on the filter cartridge
then screw it onto the lower suction
inside the basin.
2) Unfold the inflatable spa over the
base protector.
5) Insert the inflation hose into the
inflatable spa
8) Remove the inflation hose and
screw the cap firmly in place.
11) Ensure that the drain caps are
properly closed before before filling
the spa
3) Bring the pump unit to the inflatable
spa.
6) Connect the pump unit then press
the button to inflate the spa.
The air flow valve prevents your spa
from over-inflating.
9) Connect the unit pump to the pool
using the 3 connectors to screw.
Ensure the icons on the pump and the
pool match up
12) Fill the spa pool until the indicated
fill level is reached.
Your spa is ready to be used.
EN