Control Panel - NetSpa ASPEN Guia De Instalacion Y De Utilizacion

4. USAGE

4.1. Control panel

Filtration
Heater
Massage
Lock control
4.2. Functions
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius de-
grees to Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will flash. When it is
flashing, you can set the desired temperature. The value will increase or decrease
1 degree at once. The temperature could be set between 30°C to 42°C (86°F to
107°F).
To lock or unlock the control panel, press the Lock button and hold 3 seconds.
Lock the control panel when you are away to prevent other people come to
change your settings..
Press the massage button to activate the bubble massage system, the green
indicator light turns on. It can be turned off by pressing it again.
Note :
- The massage system will stop automatically after 30 minutes of operation. Re-activate the mas-
sage function by pressing the massage button again.
- When filter button is on, pressing bubble button will exchange filter mode into massage mode: filter
indicator light will turn off and massage indicator light turn on. If press the bubble button again, the
massage mode will be changed back to filter mode.
Screen
Temperature
units indicator
panel
Increase
temperature
Temperature
units
selector
Decrease
temperature