Speed Settings - Bodum BISTRO 11151 Instrucciones De Uso

To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not modify the plug in any way.

sPeeD settInGs

The following guide will help you select the appropriate
mixing speed.
NOTE: the consistency of the mixture is liable to change as
ingredients are added; it may be necessary to increase or
decrease the speed accordingly.
STEP 0
The appliance is switched off. Use this setting and discon­
nect the appliance from the mains when cleaning it or put­
ting it away.
STEP 1
For mixing and kneading dough.
STEP 2
For sauces and blancmange, flans, etc.
STEP 3
For a variety of baking mixtures.
STEP 4
For beating butter and sugar, biscuit doughs, cake mixes
and icing mixtures.
STEP 5
For incorporating air into mixture to make it light and
fluffy, such as mashed potatoes or eggs.
HoW to use Your HAnD MIXer
INSERTING THE ACCESSORIES
– Before inserting the accessories, check that the speed
control (1) is set to position «0» and that the appliance is
disconnected from the mains.
– Insert the selected accessory into the coupling assembly
(8) while rotating it slightly until it engages.
– When inserting the dough hooks (4a, 4b), check that they
are correctly positioned in the coupling assembly (8): the
left dough hook (4a) will only fit in the left–hand aper­
ture (which has a visible step in it). The right dough hook
(4b) will only fit in the right–hand aperture (which has no step
in it).
– The two stirring wands (3) and the whisk (5) fit either
aperture of the coupling assembly (8).
RELEASING THE CORD
– Using one hand to hold the mixer by its handle (11), use
the other hand to pull the cord and mains plug from the
cord compartment (6). Take care not to damage the cord
as you do so.
CONNECTING TO THE ELECTRICAL SUPPLY
– Accessories must always be fitted to the hand mixer
before it is connected to the mains.
5