Publicidad
Idiomas disponibles
Idiomas disponibles
the cover slot, then turn on the machine.
3.For using, assemble according to the diagram of "name and
position of main components". Turn on power supply, press switch to let
the machine run no-load for 5 sec. Put prepared vegetable or fruit into
feed port of the juicer, press with the pushing bar, evenly, hard
and slowly, juice of the
vegetable or fruit can be found, original,
fresh, good for health.
4. Note: when pressing food with the pushing bar, force shall be
even or indirect, pressing force shall not be more than 1 kg, no too
sudden force, otherwise, juicing effect will be reduced.
Op er at in g t im e
This machine is designed with button switches of O grading, I
grading, II grading (O for stop, I for weak grading, II for strong
grading).
For juicing, select strong grading, for operating time, after
operating for 1min, stop for 1min, then use again. After the above
operation is performed for three
times, stop for 15 min, do not operate until the motor is cooled, in this
way, service life of this machine will be prolonged, the machine will
serve you more efficiently.
Main t en an ce an d clean in g
1.This machine shall be often used, so as to keep the motor dry and
clean.
2.If not using for a long time, please store this machine at a dry and
well-ventilated place so as to prevent the motor from being damped and
going moldy.
3.No washing the main machine. When cleaning, only wipe with wet cloth
Other components may be washed directly with water, such as pushing
bar, cover, middle seat, residue cup, juice nozzle cover.
220-240V~ 50/60Hz 400W
MADE IN CHINA
22
Publicidad
