Pre-Installation; Planning Installation; Tools/Materials Required; Parts Required - Glacier bay 1000839366 Guía De Uso

Pre-Installation

PLANNING INSTALLATION

Unpack and inspect this product for chips, scratches, cracks, dents, and scuff marks. If any damages or defects are identified or, if any parts are
missing, please contact the manufacturer .
You may choose to install this sink either undermount (below the counter) or topmount (above the counter) . You must install this sink in a counter
at least 36 in . (914 mm) wide with a solid surface that has a minimum thickness of 3/4 in . (19 mm) .
Protect the entire surface of the product during installation to prevent damage .
TOOLS/MATERIALS REQUIRED (NOT SUPPLIED)
Measuring tape
Saber-saw or
Jig-saw
Silicone Sealant
Hacksaw
Safety goggles
PARTS REQUIRED (NOT SUPPLIED)
NOTE:
Parts not shown to actual size.
QK053
Carpenter's square
Electric drill with
3/8 in . (10 mm) drill
bit and 1 in . (25 .4
mm) hole saw
Pencil
Thread Seal
Plastic
Tail pipe
flange
4
Wrenches (2)
Pipe wrench
Flathead
screwdriver
Safety gloves
Connecting
Supply line
nut