Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Solid Carbon-Steel ER70S-6
Flux Cored/Carbon-Steel E71TGX
Aluminum ER5356
Stainless Steel ER308L
•
Must be used with CO2 or 75%
Argon/25% (C-25) shielding gas
•
CO2 gas is economical and
provides deeper penetration
•
75% Argon/25% CO2 has less
spatter and a better bead
appearance
•
Indoor use with no wind
•
For auto body and manufacturing
fabrication
•
Welds thinner materials (22
gauge) than flux cored wires
•
No shielding gas required
•
Excellent for outdoor or windy
conditions
•
For dirty, rusty, or painted
materials
•
Hotter than solid wires
•
Welds to 18 gauge materials and
thicker
•
Must be used with Argon
shielding gas
•
Recommended to me used with
spool guns for best results
•
Harder wire for stronger welds
and easier feeding
•
Must be used with Trimix
(Helium/Argon/CO2) or spray
shielding gas
•
Used for 301, 302, 304, 305, and
308 stainless based materials
4-4
Publicidad
Tabla de contenido
