Bimar VPM410 Manual De Instrucciones página 11

 If the supply cord is damaged, it must be replaced by the
manufactuer, its service agent or similarly qualified persons in
order to avoid a hazard.
 Do not use the appliance with a timer or a programmer or with
a system that can switch on the appliance automatically, to
avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
 In the event of a breakdown or poor operation, turn the fan
heater off and ask for professionally qualified help: repairs
made by unqualified persons can be dangerous and render
void the warranty.
 Ensure that the fan is switched off from the supply mains
before removing the guard.
INSTALLATION
 After removing the packing materials, check the integrity of the appliance; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach
of children because they are potential sources of danger. Attention: any stickers
or advertising material applied to the grid removed before using the appliance.
The manufacturer declines all responsibility in case this is not safe working
practices will be respected.
 Before connecting the appliance, check that the voltage shown on the data plate
matches that of your electricity, and that the electric plug is grounded. In the
event of incompatibility between the electric outlet and the plug of the
appliance, have the outlet replaced with another more suitable type by
professionally qualified personnel, who will make sure that the section of the
wires of the outlet is appropriate for the absorbed power of the heater. In
general, the use of adapters or extension cords is not recommended; if their use
is indispensable, they must conform to existing safety standards and their
current capacity (amperes) must not be less that the maximum of the appliance.
 The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
 To not place the appliance near sinks or other container of liquids (minimum
distance of 2 meters) to avoid the risk of it falling in.
 Do not place the appliance near an open flame, cooking or other heating
appliance.
 Keep the fan far away from fabrics (curtains, etc.) or unstable materials that
could obstruct the air intake grille; make sure that the front is free of unstable
materials (dust, etc.).