SOUNDMASTER Highline FUR6005 Instrucciones De Montaje Y Seguridad página 14

Action (during data adjustment):
- Press << / Tune - button (10) to adjust data backward.
- Press >> / Tune + button (11) to adjust data forward.
-
Keep depress << or >> button for 3 seconds to enable auto forward.
Press the alarm set button (8/9) during normal mode to show the alarm time. Afterwards keep
depress the alarm set button (8/9) over 2 seconds to enter the alarm set mode. After enter the
setting mode, press the alarm set button (8/9) to change the mode cycle as follow:
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep → AL 1 wake
radio → AL 1 wake radio volume → Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep → AL 2 wake
radio → AL 2 wake radio volume → Normal.
Select alarm weekday mode as follows
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
Action (during data adjustment):
-
Press << / Tune - button (10) to adjust data backward.
-
Press >> / Tune + button (11) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto forward.
-
Enable / disable the Alarm
Press and hold the "ALARM 1" (8) / "ALARM 2" (9) button to enable or disable the alarm. Once
the alarm is activated, the bell symbol will be appeared on the display.
Alarm duration and snooze function:
Alarm Duration – Beep alarm or radio alarm will continue output for 30 minutes if no key press,
then it will stop automatically and wait for same alarm time on next day.
Action for Snooze:
- During alarming, press Snooze button (13) will enable snooze function, Beep alarm or Radio
alarm will stop.
- Snooze interval is 9 minute (not include second offset)
- Snooze will continue unless press ON/OFF button (14) to alarm off of Buzzer alarm or Radio
Alarm stop automatically after 30 minutes.
3
FUR6005 / English Instruction Manual