Perel AC049 Manual Del Usuario página 6

4. Description
Refer to the illustrations on page 2 of this manual.
1 power plug
2 mains cable
5. Operation
5.1 Before Use
5.2 Connection
1. Connect the charger to the battery.
2. Connect the power cable of the battery charger to the mains.
The LED will light.
3. Press the MODE button and select the charging mode.
4. Stop the charging at any time by disconnecting the charger from
the mains.
5.3 Battery Types and Settings
V. 01 – 17/08/2017
WARNING
 Before connecting the battery
charger, read the operating
instructions carefully.
 In addition, observe the vehicle
manufacturer's instructions for a
permanently connected battery.
Turn off the ignition.
 Clean the battery terminals.
Ensure that your eyes do not
come in contact with the dirt in
the process.
 Ensure sufficient ventilation.
AC049
3
4
Select charging mode or reset
during charging.
6
charging cable
clamp
©Velleman nv