Assembly; Operation - Homelite UT10544 Manual Del Operador

UNPACKING
This product has been shipped completely as-
sembled.
 Carefully remove the product and any acces-
sories from the box. Make sure that all items
listed in the packing list are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be miss-
ing or damaged. Use of a product that is not
properly and completely assembled could result
in serious personal injury.
 Inspect the product carefully to make sure no
breakage or damage occurred during ship-
ping.
 Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Chain Saw
Scabbard
Combination Wrench (UT10546, UT10566 &
UT10586 only)
2-Cycle Engine Lubricant
Bar and Chain Lubricant (UT10584, UT10586)
18 in. Replacement Chain (UT10584, UT10586)
Case (UT10564, UT10566, UT10584, UT10586)
Operator's Manual
WARNING:
Do not allow familiarity with this product to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict seri-
ous injury.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or cre-
ate accessories not recommended for use with
this product. Any such alteration or modifica-
tion is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
NOTE: The chain saw has been fully factory tested.
It is normal to find some slight lubricant residue
on the saw. Read and remove all hang tags and
store with the Operator's Manual.

OPERATION

WARNING:
Muffler surfaces are very hot during and after
operation of the chain saw; keep all body parts
away from the muffler. Serious burns may occur
if contact is made with the muffler.
Page 11 — English