Intended Use - DeWalt DWV009 Manual De Instrucciones

Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D WALT tools are factory tested; if this tool does not
E
operate, check power supply.
NOTICE: DO NOT operate this tool on D.C. current. Tool damage
may occur.
SAVE THESE INSTRUCTIONS
FIG. 1
B
A
C
E
L
J
H
M
G
K
F
D
N
COMPONENTS (FIG. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
A. Top handle/cord wrap
B. Power cord
C. Vacuum head
D. Canister latch
E. On/off power switch
F. Canister
G. Suction hose

INTENDED USE

This vacuum is used for general dust and small debris pickup.
DO NOT use in rain or in presence of flammable liquids or gases.
These heavy-duty vacuums are for professional use. DO NOT let
children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
NOTE: This vacuum is intended for commercial use.
This appliance is not intended for use for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience or knowledge.
Children should be supervised to ensure they do not use the
equipment as a toy.
ASSEMBLY (FIG. 1–4)
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect tool from power source before
making any adjustments or removing/installing attachments
or accessories. An accidental start-up can cause injury.
27
H. Casters
I. HEPA Filter
J. Threaded hose inlet
K. Hose strap
L. Outlet for power tools
M. Bag
N. Airlock connector