Storage Recommendations; Assembly And Adjustments; Intended Use - DeWalt DWH161 Manual De Instrucciones

Ocultar thumbs Ver también para DWH161:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Always
unplug the charger from the power supply when there
is no battery pack in the cavity. Unplug the charger
before attempting to clean.
6. Do not freeze or immerse the charger in water or any
other liquid.

Storage Recommendations

1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Specifications
Airfow
Weight (without battery)
Hose Length
HEPA Filter
Filter Cleaning Mechanism
Static Water Lift
Vacuum Suction Pressure
Capacity
Anti-Static Hose
Voltage
Wireless Tool Control™
Height
Length
Width
Wet/Dry
Noise values and vibration values (triax vector sum) according to
EN60745-2-6:
L
(emission sound pressure level)
pA
L
(sound power level)
WA
K
(uncertainty for the given
wa
sound level)

Intended Use

Your dust extraction system DWH161 has been designed
for the extraction of dust in professional hammerdrilling in
masonry or concrete, and with solid drill bits mounted to
the power tool. DO NOT use with SDS PLUS or SDS MAX
hollow drill bits. This dust extractor is for household and
commercial use.
This dust extraction system will fit the D
DWH200D, DNP615 and DNP616.
DWH161
cfm
19
3.64 lbs (1.65 kg)
39" (99 cm)
Yes
Yes
in
38
mbar
95
cm³
210
Yes
V
20
Yes
9.53" (242 mm)
7.99" (203 mm)
3.74" (95 mm)
Dry only
dB(A)
66.3
dB(A)
82.5
dB(A)
1.5
WALT D25301D,
e
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
The dust extraction system is an attachment for use with
professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Attaching the Strap (Fig. A, D)
Your dust extraction system comes with a strap
be connected to the strap hooks
shown in Fig. D.
Fig. D
10
11
Attaching the Crevice Tool or Utility Tool
(Fig. A)
To attach the crevice tool
the dust extractor hose
6
extractor hose into the open end of the accessory with a
twisting motion until tight.
nOTE: The dust extraction hose is not compatible with
AirLock® connectors.
To remove the crevice tool or the utility tool, hold the
dust extraction hose and accessory pull the accessory off
using a twisting motion.
Installing the Belt Hook (Fig. E)

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.

WARNING: To reduce the risk of serious personal
injury, ONLY use the tool's belt hook to hang
the tool from a work belt. DO NOT use the belt
hook for tethering or securing the tool to a person or
object during use. DO NOT suspend tool overhead or
suspend objects from the belt hook.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook
is secure.
English
10
that can
11
in either manner as
10
11
12
or the utility tool
13
to
, insert the end of the dust
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dwh161d1Dwh161b

Tabla de contenido