Tabla de contenido
Publicidad
Thank you for purchasing this Pioneer product.
To ensure safe and proper usage, please read the
accompanying Operating Instructions carefully
before using the product.
Keep the Operating Instructions stored in an
accessible place.
Installation Work
This product is sold on the premise that it will be installed
by a professional with sufficient technique and skills.
Make sure to request installation and mounting from a
professional construction company or your sales agent.
Pioneer shall not be liable in any way for any accidents
or damage resulting from improper installation or
mounting, incorrect usage, remodeling, natural disasters
or the like.
Note to Construction Companies
Prior to installing this product, please read Pioneer's
technical manual thoroughly and heed its content.
Pioneer shall not be liable in any way for any accidents or
damage resulting from other than the specified assembly,
mounting and usage, from remodeling, or from natural
disasters or the like.
Usage Precautions
1. This product is exclusively for use with the plasma display.
2. It should not be used for any other purpose, such as for
holding a plasma display, or remodeled in any way.
3. The installation site should
(a) be strong enough to support the weight of the plasma
display,
(b) not allow people to easily hang from or bump into the
setup,
(c) not be outdoors or in proximity to hot springs or the
ocean, and
(d) not be subjected to vibration or shock.
(e) In addition, a professional construction company
should be consulted in the event that the walls are
not structurally sound enough to permit installation.
(f) Make sure to thoroughly read the Operating
Instructions for the plasma display and heed all other
cautions pertaining to the installation site.
4. Assembly and Installation
(a) Follow the assembly procedure and tighten screws
in all of the specified places.
Failure to do so could cause an unexpected accident,
such as the display breaking or falling down after it
has been installed.
(b) For safety reasons, have two or more people perform
the work.
(c) Prior to starting the work, make sure to turn OFF the
plasma display's main power switch and to unplug
the power plug from its outlet.
5. Do not loosen any of the screws, as doing so could cause
the display to fall down or a similar accident.
6. If you detect any abnormalities or poor performance,
immediately contact a professional construction company
for repairs.
7. As damage that is not readily visible, such as to the interior
of the display's metal fixtures or the parts mounted against
walls, could cause the display to fall down, make sure to
contact a professional construction company for related
inspection when having the display inspected or repaired
or when having interior finishing done.
We recommend having a professional construction
company make periodic inspections, when possible.
8. With long-term use, the display's metal fixtures could lose
their strength, depending on the environment. To promote
problem-free use, we thus recommend having a
professional construction company inspect the installation
every five years, as a rule.
Confirming the parts provided
Before assembly, check to make sure that none of the parts
provided are missing.
* Screws to be used for wall installation are not included.
Obtain them separately.
Prepare a Phillips head (+) screw driver.
1
Hung on wall unit
2
3
Hexagon wrench (1)
(Opposite side 6 mm for M8 use)
Bolts M8 (6)
4
Stencil
5
En
Publicidad
Tabla de contenido
