Options
High Temp
Raises the main wash temperature to
improve cleaning. When used with
the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the Pots
& Pans cycle.
Sani Rinse
This high temperature option sanitizes
your dishes and glassware in
accordance with National Sanitation
Foundation (NSF)/ANSI Standard 184
for Residential Dishwashers. Certified
residential dishwashers are not
intended for licensed food
establishments. The Sani indicator
indicates at the end of the cycle
whether the Sani Rinse option was
successfully completed. If the
indicator does not activate, it is
probably due to the cycle being
interrupted.
Heated Dry
Turns the heat element on after the
wash cycle is completed. Use rinse
aid with or without the Heated Dry
option for best drying results. Plastic
items are less likely to deform when
loaded in the top dish rack.
†
The maximum additional water used for any combination of options is 2.6 gal. (10.0 L).
Delay Hours (on some models)
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak
hours when possible.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button.
3. Press START/RESUME.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again, to resume the
delay countdown.
18
Can be selected
What it does
with
Raises the main wash
H E
®
SmartWash
temperature from 105°F
Pots & Pans
(41°C) to 130°F or 135°F
Normal Wash
(54°C or 57°C).
Increases the main wash
temperature from 105°F
H E
®
SmartWash
(41°C) to 130°F (54°C)
Pots & Pans
and the final rinse from
Normal Wash
140°F (60°C) to 156°F
(69°C).
Available with
Turns the heat element
any cycle
on at the end of the
except
wash cycle.
Quick Rinse
Dishwasher Control Section
Added time to cycle
Gallons
Typical
Max
35
45
(0 - 10.0)
60
90
(0 - 10.0)
32
32
Added
†
Water
(Liters)
0 - 2.6
0 - 2.6
0