Cleaning Lock Function; Automatic Time Limitation; Basic Settings - NEFF T4 D 0 Serie Instrucciones De Uso

Once the time has elapsed
A warning beep sounds. In the time program function
display is shown, and the
10 seconds the indicators turn off.
Pressing the symbol turns off the indicators and stops the
beep.

Cleaning lock function

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
Deactivated.*
Activated.
Sound signals
Confirmation beep and error signal deactivated.
Only confirmation beep deactivated.
All signals activated.*
Automatic timer
Switched off.*
- Automatic shut-off time
Duration of the time program function warning signal
10 seconds*.
30 seconds.
1 minute.
*Factory settings
indicator comes on. After
and
Changing or cancelling the time
Press the symbol several times until the
lights up. Change the time with the + or - symbols, or set to
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
indicator
.
23