The Timer; Cleaning Lock Function; Automatic Time Limitation; Basic Settings - NEFF T T48 Serie Instrucciones De Uso

Changing or cancelling the time
select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set to
.
‹‹
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays and the time program function screen displays
‹
for one minute. The
‹‹ x
Pressing any symbol turns off the indicators and stops the
beep.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Notes
If cooking times have been programmed for various plates,
■
the time program function displays the shortest cooking time.
The x indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
■
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
■

Cleaning lock function

Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Remove the Tipp control. A signal sounds and the
lights up. The control panel is locked for 35 seconds. The

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
Deactivated.*
‹
Activated.
‚
™ƒ Audible signals
‹ Confirmation and error signals deactivated.
Only confirmation signal deactivated.
‚
All signals activated.*
ƒ
*Factory settings
3
indicator of the hotplate flashes.
"
"

The timer

symbol
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
Press on the
1.
display shows
Select the required time using the Tipp control.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
3
control, or set to
Once the time has elapsed
A warning beep sounds. The time program function displays
and the indicator
‹‹
off the indicators and stops the beeping.
surface of the control panel can now be cleaned without risk of
changing the settings.
Note: The lock does not affect the main switch. The hob may
indicator
be turned off when desired.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and selected power level (from 1 to 10 hours).
‰
3 symbol, and the time program function
‹‹ .
symbol and change the time using the Tipp
.
‹‹
comes on. Pressing any symbol turns
V
31