Gude MIG 192/6K Traducción Del Manual Original página 33

Dispositivo de soldadura
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
Use a welding mask!
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Pressure bottle to be secured by chain
Warning against dangerous
voltage
Risk of explosion
Warning against toxic fumes!
Keep dry at all times. Never expose tool
to rain.
Keep distance of persons Observe to keep
out of dangerous zone
~
Single-phase transformer with rectifier
1
MIG (welding, metal-inert-gas)
MAG (welding, metal-active-gas)
Suitable for welding with an increased
electric risk.
Single-phase alternating current with
rated frequency of 50 Hz
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Keep dry at all times.
CE marking
TÜV / GS conformity mark
MAINTENANCE
Machine to be always unplugged before
any adjustment and servicing work on it.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING The appliance must not be used if da-
maged or safety equipment is defective. Replace any
worn-out and damaged parts.
If necessary, a list of spare parts can be found at www.
guede.com.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making. 
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Oil all moving metal parts on a regular basis, e.g.
wheels and side flap.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
Storage
The appliance must be stored in a dry place and
protected from frost.
Leave the device to cool after use.
Do not cover the device directly after use or place in
a cabinet.
Lock the device in a proper place to protect it from
unauthorised use.
ENGLISH
29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20076

Tabla de contenido