Box Content; Description And Connections - FTE Maximal HCA 42 P Manual De Usuario

Capítulo 1. Instalación.
1.1. Medidas de seguridad
1.- Never place the equipment next to hot sources.
2.- Never undergo the equipment to temperatures that exceed the level of operation of the device.
3.- Do not expose the equipment to dripping or splashing.
4.- Do not place objects filled with liquids on the equipment.
5.- Respect ventilation slots of this equipment. Avoid covering them with any object.
6.- Keep clean and without obstacles a minimum radius of 40 cm around this equipment.
7.- Avoid locations with possibilities of spilling liquids on the inside of the device, and with important changes of
temperature.
8.- Use the equipment only in moderate climates (not in tropical climates).
9.- Never open the cover of the power supply yourself due to electric risk. In case of problems, go always to qualified
technicians.
10.- Never, under no circumstances, open the equipment connected to the electrical net.
11.- During the handling it is better to disconnect the equipment of the electrical net.
12.- Respect the electricity security rules during the assembling. Use materials that obey the current law.
13.- The connecting plug must be accessible in a fast and simple way to have a fast disconnection.
14.- Never touch the plug with wet hands. Also, disconnect always the device before handling the connections.
15.- Never put any heavy object over the device, as it could get damaged.
16.- If the equipment is going to remain some time without use, it is recommendable to disconnect it from the electrical
net.
17.- The repairmen and the maintenance of the equipment must be done by TV and radio specialist technicians.

1.2. Box content

•
User's manual
•
Amplifier HCA 42 P
•
Hexagonal Key

1.3. Description and connections

HCA 42 P is a line terrestrial amplifier allows amplify the terrestrial RF signals in the input to be distributed in the rest of
installation. The amplifier has one RF output and one test output. It have equalized and adjustable output. The amplifier
is designed to be used in indoor only.
Connections:
1. RF input
2. Test output -30 dB
3. RF output
4. Ground connector.
5. AC IN: feeding cable 230Vac / 50-60Hz
HCA 42 P
User's manual · HCA 42 P
1 2 3
- 1 -
4
5
Versión_en_1.0 Fte maximal