Steam-Cleaning - Samsung NE59 685 Serie Manual De Usuario

Maintaining your appliance
How to run a self-cleaning cycle
Select the length of time for the self-cleaning operation, eg. 3 hours.
1.
Press Self Clean once for a 3 hour clean time, twice for a 5 hour clean time, or
3 times for a 2 hour clean time.
The default setting is 3 hours.
2. Start the self-cleaning cycle.
Press START/SET. The motor-driven door lock will engage automatically.
NOTE
• You will not be able to start a self-cleaning cycle if the control lockout
feature is activated or if the oven's temperature is too hot.
• The oven door locks automatically. The display will show the clean time
remaining. You cannot open the oven door until the temperature drops to
a safe/cool temperature.
• The self-cleaning feature will not operate when the warming center is on.
3. When the self-cleaning cycle is done, End will appear in the display and the
range will beep 6 times.
How to delay the start of self-cleaning
1. Press Self Clean.
Select the desired self-clean time by pressing Self Clean.
2. Press Delay Start.
3. Enter the time you want the clean cycle to start.
4. Press START/SET.
The display will show Delay, Self clean, and the Lock icon. The motor-driven
door lock will engage automatically.
5. The Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1. Press OFF/CLEAR.
2. You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
44 English
NE59M6850SS_AA_DG68-00883A-04_EN+MES+CFR.indb 44
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth
after the oven cools. (If white spots remain, remove them with a soap-filled
steel wool pad and rinse thoroughly with a vinegar and water mixture.)
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.

Steam-cleaning

How to set the oven for steam-cleaning
For light cleaning, the Steam-cleaning function saves time and energy. For heavier-
duty cleaning, use the self-cleaning function.
1.
2.
3.
4.
5.
6.
NOTE
When steam-cleaning, use exactly 10 oz. of water since this produces the best
results.
Remove all accessories from the oven.
Pour approximately 10 oz. (300 ml) of
water onto the bottom of the empty
oven and close the oven door.
Use normal water only, not distilled
water.
Press Steam Clean.
Press START/SET.
When the operation is complete, the
display will blink and a beep will sound.
Press OFF/CLEAR.
Clean the oven's interior.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
2019-02-01 12:47:58