Blue Clean 1900 PSI Instrucciones De Montaje, Cuidado Y Uso página 10

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
OFF/0
ON/I
• Turn the power switch to the "ON" (|) position. The
unit will turn on for 1 - 2 seconds and shut off. This is
a normal function of the auto start feature. Squeeze
the spray gun trigger to begin pressure washing.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer
• Allow the motor to come to a complete stop before
squeezing the trigger again.
• Squeezing rapidly will cause the auto start feature to
miss an on/off cycle that may prevent it from turning
on while squeezing trigger after rapid squeezing. Use
slow deliberate trigger pulls to avoid such symptoms.
• When using the detergent, fill it with a
properly formulated detergent or cleaner with
water ratio according to instructions on the
container.
• DO NOT use thick gel-like detergents, as they
will clog the power washer and can cause
damage.
10
OFF/0
ON/I
• Always test a small area to avoid chance of
damaging the surface.
• When removing the detergent tank remove lid
and place finger in tank lifting up while pulling
tank out.