IMPORTANT SAFETY
WARNING: To reduce the risk of fire, electrical shock, injury to persons,
or damage when using the range hood, follow basic precautions,
including the following:
•
This appliance is intended for
normal family household use
only.
•
Before servicing or cleaning
the unit, switch power off
at service panel and lock
the service disconnecting
means to prevent power
from being switched on
accidentally. When the
service disconnecting means
cannot be locked, securely
fasten a prominent warning
device, such as a tag, to the
service panel.
•
Installation work and
electrical wiring must be
done by qualified person(s)
in accordance with all
applicable codes and
standards, including fire-rated
construction.
•
Do not operate any fan with
a damaged cord or plug.
Discard fan or return to an
authorized service facility for
examination and/or repair.
INSTRUCTIONS
•
Sufficient air is needed
for proper combustion
and exhausting of gases
through the flue (chimney)
of fuel burning equipment
to prevent backdrafting.
Follow the heating equipment
manufacturer's guideline
and safety standards such
as those published by the
National Fire Protection
Association (NFPA), the
American Society for
Heating, Refrigeration and
Air Conditioning Engineers
(ASHRAE), and the local code
authorities.
•
When cutting or drilling into
wall or ceiling; do not damage
electrical wiring and other
utilities.
•
Ducted fans must always be
vented outdoors.
•
For general ventilating use
only. Do not use to exhaust
hazardous or explosive
materials and vapors.
•
To reduce risk of fire and to
properly exhaust air, be sure
to duct air outside - do not
vent exhaust air into spaces
within walls or ceilings, attics
or into crawl spaces, or
garages.
•
To reduce the risk of fire, use
only metal ductwork.
•
To reduce the risk of fire or
electrical shock, do not use
this fan with any solid-state
speed control device.
3