Dehumidifier Use; Setting The Controls - Hisense DH-50K1SJE5 Guía De Instrucciones

Control Panel
WATER FULL
AUTO AUTO
CONTINUOUS
HIGH
LOW NORMAL
POWER
FAN MODE
NOTES:
The control panel of your model may differ from the one shown above.
■
PUMP, HEAT, IONIZER button may not be displayed on the
■
panel, if your model does not have these functions.
Starting/Stopping the Dehumidifier
NOTES:
Before turning on the dehumidifier, be sure that the bucket
■
is empty and fits all the way into the dehumidifier.
Each time you unplug the dehumidifier or power is interrupted,
■ ■
the controls will return to the previous settings when power is
restored.
Minimum operating temperature is 38
■ ■
Humidity displayed is between
■
90% Relative Humidity.
Humidity can be adjusted between
■
80% Relative Humidity.
Electric Shock Hazard
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire or electric shock.

DEHUMIDIFIER USE

P P
PUMP
TIMER H EAT
FILTER MONITOR
ºF (3 ºC)
30% Relative Humidity
30% Relative Humidity
WARNING

Setting the Controls

1. Plug into a grounded three-prong outlet.
2. Press POWER to turn on the dehumidifier.
3. Press FAN to choose the fan speed.
4. Press MODE to choose the mode.
5. Press the plus or minus arrow button to choose the level
of humidity.
z
IONI ER
6. Press POWER to turn off the dehumidifier.
NOTE: The dehumidifier will retain your last settings.
WATER FULL Light
If this light is on, the dehumidifier is not running. This light
light indicates that you need to check:
If the bucket is full, empty and reinstall bucket.
■
■ If the bucket is not in position, remove the bucket and
reinstall it. Make sure the bucket fits all the way into the
dehumidifier and the light is off, or dehumidifier and the
the heat modes will not run.
Fan Speed
1. Press FAN to select fan speed.
and
2. Choose Low, High or Auto.
and
■ Low Will reach the desired humidity setting slower with —
lower sound level.
High—Will reach the desired humidity setting faster.
■
Auto Will provide the maximum humidity control by automatically —
■
adjusting the fan speed.
5