TO START THE HEATER
1. Connect the POL inlet on the regulator of the heater to the propane cylinder.
2. Open the cylinder valve.
3. Depress the fan switch to the "ON" position. The fan motor will start and air will be pushed through the
outlet of the heater.
4. Depress the heat switch to the "ON" position. The burner should ignite and hot air will be pushed through
the outlet of the heater.
5. Set the Thermostat (if provided) to desired temperature.
6. If heater fails to ignite after 3 attempts call your supplier for service.
TO SHUT DOWN
1. Close fuel supply.
2. Move "Burner" switch to "OFF" position.
3. Wait 2-3 minutes and move "FAN" switches to the "OFF" position.
4. Disconnect heater from fuel supply.
12
OPERATION
Propane Portable Heaters Manual