Introduction; Symbols Used In This Manual; Safety; General Safety Information - BAT 2040 Manual Para Uso Y Mantenimiento

Use and maintenance manual
1

Introduction

This manual, together with the others attached (e.g. motor manual, remote control etc.), is an integral part of the
product and has been written for its user; it is fundamental to the correct use and maintenance of the product.
If this manual is lost or destroyed, the user must request a new copy from the reseller, supplying them with the
main product data and the destination of the new copy.
The pages and content contained within this manual must not be removed, rewritten or modified in any way.
This manual must be kept intact in an easily accessible location until the product is disposed off.
The Manufacturer reserves the right to update its products and their corresponding manuals without any obligation
to update previous products and manuals.
The Manufacturer reserves all rights concerning this manual: no reproduction shall be permitted, in whole or in
part, without its express written authorisation.
THE DECLARATION OF PERFORMANCE (DOP) MUST BE REQUIRED TO THE DEALER.

1.1 Symbols used in this manual

WARNINGS:
INFORMATION AND WARNINGS
Instructions and advice to help ensuring correct use and storage of the product. Failure to follow these
instructions may compromise the product's integrity and/or strength.
CAUTION
Operator hazard! Instructions and warnings to be read and followed carefully. Failure to observe these
instructions may put people's safety at risk.
CAUTION
Read the instructions carefully before using the product.
Leggere attentamente
il Manuale
ICONS INCLUDED IN THIS MANUAL:
Single Module
Added Module
2

Safety

2.1 General safety information

• Close the product completely in the event of bad weather or snow. Danger of damage or injury.
• Operations of assembly/installation and first use, adjustment and extraordinary maintenance must only be
performed by technicians trained and specialised for those tasks, contact Technical Support.
•
Do not place objects on the awning fabric.
• It is forbidden for people to hang or hold themselves on the product, this would create a serious risk of injury
as well as potentially damaging the product itself.
• The Manufacturer shall not be held responsible for any damage resulting from either tampering or unauthorised
modification of the product.
• The user must not perform any operation or work on the product for which they are not authorised see Ch.Pt.4
"Intended use and installation location", P. 24 and Ch.Pt.5 "Maintenance", P. 25.
•
Ensure there is nobody obstructing or excessively close to the product's moving parts when opening and
closing.
• Do not use open flames near or under the awning: the fabric can catch fire, even if made of non-flammable
material.
• Removing safety warnings (adhesive labels) is strictly forbidden.
• For products which can be operated from a position where they cannot be seen, or automatically by weather
06/09/2019 Rev.05
2040
21