Manual/Automatic Function; Manual Function; Automatic Function - Rointe M Serie Manual De Instrucciones

Send the adjustment to the radiator, water heater or
towel rail by pressing . See point 2.6.

2.3. Manual/Automatic function

By pressing we will switch between the Manual or

Automatic function.

When on Manual function, the symbol will be shown
on the display. In the case of Automatic function, the
symbol will be shown.

2.3.1. Manual function

Within this function you set manually the temperature
pressing or . Depending on the temperature
selected you will see on the display one of these
symbols:
Heating selected
Symbol Mode Temperature range
COMFORT 20ºC 30ºC
ECO 15ºC 19.5ºC
ANTI-FROST 8ºC
Water heating selected
Symbol Mode Temperature range
COMFORT 55ºC 72ºC
ECO 40ºC 54.5ºC
ANTI-FROST 8ºC
Send the changes by pressing . See point 2.6.
Please note: whilst in Manual function the
automatic programming will not work.
2.3.2. Automatic function
This function allows you to programme the Rointe
Digital System. It is necessary to have selected the
Automatic Mode to programme.
10