Programming - Rointe M Serie Manual De Instrucciones

2.3.2.1. Programming

1. Press
display screen:
2. Select the days you wish to programme by
pressing the respective key (1 to 7). Selected day(s)
will stop blinking.
If you need to unselect some day(s), simply press
again its key so it will start blinking again.
Press again to continue with the programming.
3. You will see 0h, 1h, 2h...on the display, and the
symbols will blink alternatively over the 0 to 1 hour,
meaning that there is no programme for that period.
Pressing
bar, from 0h to 23h.
4. Press
in all the hours you want to programme. During all
hours with no mode selected the apparel will be off
(or Anti-frost, see point 2.5)
With the keys
the fixed temperature of the selected mode (see
temperature ranges in point 2.3.1).
REMEMBER: The chosen temperature of the
selected mode will be the same for any hour or
day with that mode set.
5. You can finish the programming any time by
simply pressing
operating with the remote.
Do not forget to send the programation by pressing
. This information will appear in the
or you will move through the hours
to switch between ECO ( ), COMFORT ( )
or you can increase or decrease
, or if you wait 1 minute not
11