Safety Notes; Maintenance And Cleaning - brennenstuhl ML CN 110 V2 IP65 Manual De Instrucciones

Mobile Chip LED Light

saFETy NOTEs

1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. If the mains supply cable of the device is damaged it must be replaced by a qualified technician
in order to avoid risks.
5. Make sure the light is attached firmly and securely.
Make sure the cable is not crimped or otherwise damaged.

MaINTENaNCE aND CLEaNING

Prior to cleaning and maintenance, please unplug the power cable from the outlet.
All maintenance work must be carried out by a qualified electrician.
PLEASE NOTE:
The LED light does not contain parts that need servicing.
The LED light source cannot be replaced.
If necessary, replace the entire light.
Do not use solvents, corrosive cleaners or the like.
Use a dry or slightly moist cloth for cleaning only.
Dispose of electrical devices in an environmentally responsible manner!
Do not dispose of electrical devices with household rubbish!
In accordance with Directive 2012/19/EU on waste electrical and electronic equipment,
used electrical equipment must be collected separately and reused or recycled in an
environmentally responsible manner.
Please contact your local authorities for available disposal options for your worn-out device.
addresses
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com
BA_0488520_Chip_LED_Leuchte_Mobil_A5_161117.indd 5
Operating Instructions
D
5
17.11.16 12:22