Chronos Manufactures André Belfort 7110 Sirène Manual De Instrucciones Y Garantía página 9

EN
Wind up the watch by turning the crown between 30 and 40 times. Pull the
crown carefully to position 2 and set the watch to 7 o'clock. Unscrew the
crown of the pushers A and B by turning them counter-clockwise.
You may set the current day with button A. With button B you may set the
month. Push the crown carefully to position 1 and set the date by turning
the crown counter-clockwise. Pull the crown carefully to position 2 again
and set the current time by turning the crown clockwise. When finished
push the crown carefully back in to place. The date/month must be set
manually at the end of the month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.