Chronos Manufactures André Belfort 8710 Marin Manual De Instrucciones Y Garantía página 9

EN
Unscrew the crown by turning it counter-clockwise. Wind the watch by
turning the crown clockwise approximately 30 to 40 turns until the second
hand starts to run. Pull the crown carefully to position 1. Set the watch to 7
o'clock by turning the crown clockwise. Unscrew the crown of the pushers
A and B by turning them counter-clockwise. You may set the current month
with button A. With button B you may set the date. Press the adjustment
pusher C with a pointed tool until the right day is displayed. Set the current
time by turning the crown clockwise. The indicator in the middle (1–24) is
the 24 hour display. When finished push the crown carefully back in to pla-
ce and bolt it by turning it clockwise. The date/month must be set manually
at the end of the month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.