Kit Content - Extel WAPP-GI2S Manual Del Usuario

KIT CONTENT :

Pan/Tilt Wireless
Appcam
SETUP THE CAMERA
1. APP DOWNLOAD
Download the APP from APP Store/Google Play.
APP name: OMGuard HD
2. Power up the camera
When GREEN LED starts a repeat cycle of one
camera is ready for Direct Wireless Connection.
Normally it takes less than 1 minute.
3a. Direct Wireless Connection
1. Go to the Wi-Fi setting on your mobile device.
Enter the default password 12345678 and save the settings.
2. From the APP, tap the „ADD Camera"
„search" icon. The camera ID will show up. Enter the
default password 123456 and save the settings. When the
it means the direct wireless connection is success fully
established. You'll see the camera view right now. Please
go on to Step 4.
3b. You can also establish a connection via Ethernet cable.
1. Connect your mobile device to your home router. Connect camera to your home
seconds to connect to router, when done, Green LED will stay ON.
2. From the APP, tap the "Search" button to locate the camera. Enter the default
password 123456. Then save the settings.
GB1
Camera Stant Antenna
CFI EXTEL O'MOUV HD - 12/2014
Power Adapter Ethernet cable
and then
Quick Start Guide