Operation And Maintenance - Amica OTC Serie Manual De Instrucciones

Use control panel to control your cooker hood (Fig. 4)
All hoods are fitted with a limit switch. Retracting telescoping arm cuts off power to the motor. Limit
switch does not cut power to the lighting.
OTC 612 B / OTC 6224 B - Figure 4b
The hood is operated by means of a set of buttons located in the front part of the panel. To start the
hood, extend the telescopic element and start the hood motor at speed (1, 2 or 3) and/or switch on
the light (L). To turn off the hood, use 0 button or push in the telescopic element.
OTC 611 I / OTC 611 W / HCT611I / HCT611W / OTC6211I / OTC 6222I - Figure 4a
The hood is operated by means of a set of buttons located on the right front side of the hood. When
the hood is off the control elements are not visible. To start the hood, extend the telescopic element
and start the hood motor at speed 1 or 2 (top button) and/or switch on the light (bottom button).
OTC 613... / OTC 612 I / OTC6223BG / OTC6243BG / OTC6223WG - Figure 4d
The hood is operated by means of a set of buttons located on the right front side of the hood (speed
setting) and left side of the hood (lighting). When the hood is off the control elements are not visible.
To start the hood, extend the telescopic element and start the hood motor at speed 1, 2 or 3 and/or
switch on the light (left side of the appliance).
OTC 614 BG - Figure 4c
The hood is operated by means of a set of sensors located in the front part of the retractable tele-
scopic panel. To start the hood, extend the telescopic element and start the hood motor at speed
1, 2.3 or 4 and/or switch on the light. Timer touch sensor activates fan timer (max 90 min.). To use
the timer function, touch the Timer sensor while the hood is running (the display shows flashing digit
„0"), then use sensors + or - to select the desired switch-off time delay. Switch-off time equals to
digit x 10 min (setting range 10 to 90 min.). After setting the switch-off time, touch the Timer sensor
again to confirm and start time count. Correct setting will be indicated by a flashing dot on the di-
splay at the hood speed setting. Motor and start delay function work only when the telescopic panel
is extended.
OTC6541WG / OTC6541BG - Figure 4e
The hood is operated by means of a set of sensors located in the front part of the retractable tele-
scopic panel.
1. Lights ON/OFF.
2. Increase the fan speed:
Speed 1: 1
Speed 2: 2
Speed 3: 3
3. Timer You can set the timer to turn off the appliance after up to 15 minutes. To set the timer touch
Speed 1, 2 or 3 while the appliance in operation. The display will be flashing indicating that timer
has been set.
Touch Speed 1, 2 or 3 again to cancel timer and turn off the appliance .

OPERATION AND MAINTENANCE

47