Trimmer Guide - Ingersoll Rand HD–EU Serie Instrucciones

PART NUMBER FOR ORDERING
R120–128–2 (for 1/4" shank)
R120–128–7 (for 1/4" shank)
LG2–129–1 (for 3/8" shank)
K Note: Offset = 1/2 ("B" dimension minus trimmer bit diameter.)
The following equipment is available at an extra price and must be ordered separately:
1. Bearing Inserting Tool (for HX or HXD models)
2. Cone Wheel Adapter (for HX models)
3. Router Attachment Assembly
for models using 1/4" diameter bits
for models using 3/8" diameter bits
4. Trimmer Guide (for Router Attachments)
for 1/4" shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for 1/4" shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for 3/8" shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
All the models listed on Page 5 can be changed to front exhaust tools by reversing the Flow Ring and aligning the the indicator
marks with the letter "F" on the Housing. To order a front exhaust tool from the factory, substitute the letter "F" for the letter
"R" in the above models. Example: HD180RG4 Rear Exhaust Model becomes HD180FG4 Front Exhaust Model.
PLACING TOOL IN SERVICE

TRIMMER GUIDE

Trimmer Guide Dimensions
A
1–1/2
2–1/2
2–1/2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
OFFSET
B C
3/8 3/8
1/2 1/2
1/2 5/8
Part No. LE2–950
Part No. LE2–104–L6
Part No. TD–RK4
Part No. TD–RK6
Part No. R120–128–2
Part No. R120–128–7
Part No. LG2–129–1
(Dwg. TPD1208)
D E
1/8 1/2–20NF
3/16 1/2–20NF
1/8 5/8–18UNF