Package Contents; Device Installation; Device Operation - LEGRAND C2G 29512 Manual De Usuario

Wireless A/V for HDMI Devices with 2 Receiver Kit User Manual
P C
ACKAGE ONTENTS
Transmitter unit
•
2 x Receiver units
•
3 x DC 5V/1A universal power adapters
•
USB power cable
•
D I
EVICE NSTALLATION
Note:
Prior to installation ensure that all devices are powered off.
•
To ensure proper air circulation, do not cover the Transmitter or Receiver unit with any objects.
•
The maximum range of 100ft can be obtained with direct line-of-sight from the Transmitter to the Receiver unit. Distance will be shortened by
•
obstacles or walls between the Transmitter and Receiver unit.
Step 1: From an HDMI source device, connect an HDMI cable to the HDMI IN port of the Transmitter unit.
Step 2: Connect HDMI cables to the HDMI OUT ports of the Receiver units, then connect the other end of the HDMI cables to display devices.
Step 3: Connect the provided DC 5V/1A power adapter to the USB Micro-B port of the Transmitter unit. Then plug the DC 5V/1A power adapter into an
available power outlet.
Step 4: Connect the USB Micro-B ends of the DC 5V/1A power adapters, that are provided, to the power ports of the Receiver units. Then plug the DC
5V/1A power adapters into available power outlets.
Step 5: Once all connections have been made and power has been established to all devices, the Transmitter and the Receiver units will begin to
automatically pair. Allow up to 2 minutes for devices to pair. Do not touch or press "PAIRING" button during the pairing process, as this will cause the
device to not function properly.
D O
EVICE PERATION
Note:
Do not attempt to access the device's IP address, as this will cause the device to not function properly.
•
The Transmitter and Receiver units come paired together. Allow up to 2 minutes for devices to pair. However if re-paring becomes necessary
•
please follow the steps below.
Step 1: First Press "PAIRING" key on the receiver units. You will see message "Connecting Please Wait" displayed on screen.
Step 2: And then Press "PAIRING" key on the transmitter unit for a second, and wait for auto connection.
3 x HDMI cables
•
Double sided tape
•
User Manual
•
2
( )
US