Descargar Imprimir esta página

GALA NUI Instrucciones De Montaje Y De Usuario página 8

Columna de hidromasaje

Publicidad

8
OPERATING INSTRUCTIONS
Español
GENERAL CONSIDERATIONS
- For your column to function correctly, the
water supply pressure must not be higher
than 5 bar or lower than 2 bar. For safety
reasons, however, it must not exceed 55ºC.
Always respect these limits. If the pressure or
temperature of the water is higher, the column
could be damaged. On the other hand, if the
pressure of the water is lower, your column
may not function correctly.
- If the boiler switches off too often and cold
water comes out when using any of the
functions of the column, clean the filters of the
taps and, if the problem persists, reduce the
temperature of hot water coming from the
boiler or heater with the appropriate control
on the device.
technical characteristics of the boiler.
HYDROMASSAGE
Pressure of the water jet: Regulate the
water flow for a more or less powerful
massage.
Combinations of the type and
duration of massage and the temperature of
t h e w a t e r e n a b l e y o u t o a d a p t t h e
hydromassage to your requirements.
In general, the intensity of the water jet has
the following effects:
-Greater intensity: toning effects
-Less intensity: relaxing effects
T h e h y d r o m a s s a g e s h o u l d n e v e r b e
excessively strong.
.
NUI
In all cases, consult the
Temperature of the water: We recommend
that this be between 30 ºC and 39 ºC:
Hydromassage:
-Cold (30 - 35ºC). With mainly toning effects.
-Neutral (36 - 37ºC). For relaxing effects.
-Hot (38 - 39ºC). For muscular applications
Hydromassage process:
Select the desired function using the function
selector, which permits the following options:
• M a s s a g e w i t h t h e h a n d - s h o w e r.
Adapting its possible
specific parts of the body.
•Body massage with vertical, movable
jets. For use o most parts of the body.
Turn the jets in the most appropriate direction,
though you can later change it to direct the
water jets onto whatever parts of the body you
want.
•Adjust the temperature of the water.
•Select the appropriate function.
•Turn the water on progressively until you
obtain the most appropriate hydromassage
pressure.
functions to

Publicidad

loading