5SEC. REC
RETAKE (R/F)
LCD monitor or viewfinder
PAUSE
5S
5Sec. Rec mode indicator
FEATURE:
Quick Review
PURPOSE:
To check the end of the last record-
ing.
OPERATION:
1) Press "
during the Record–Standby mode.
Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record–Standby mode for the
next shot.
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the
Record–Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording. Pressing "F" forwards
the tape and pressing "R" reverses
it.
3) Press Recording Start/Stop Button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
FEATURE:
5Sec. Rec (5-sec. Recording)
PURPOSE:
To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
OPERATION:
1) During Record–Standby, press
5SEC. REC. "
5Sec. Rec is reserved.
2) Press Recording Start/Stop Button.
Recording starts, and after
5-second recording is finished, the
camcorder reenters the Record–
Standby mode automatically.
To cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that "
NOTE:
The Fader (
activated by pressing 5SEC. REC.
21
EN
" and release quickly
5S" appears and
5S" disappears.
pg. 26) cannot be