Wall Mounting - Boston Acoustics TVee 26 Manual Del Usuario

Subwoofer
Subwoofer Panel Controls
17
Power Input– Plug in the Power Cord
18
Power On/Off Switch – Turns the TVee subwoofer on or off. Normally it is left on all the time.
19
Subwoofer Volume – Adjusts the volume of the subwoofer for best balance with the soundbar.
20
Pair Button – Pre-paired at the factory. See Pairing the soundbar and subwoofer.
21
Status Indicator – Lights green when the subwoofer is active and red when it is standby mode.
22
Power Cord – Provides power to the subwoofer.
Place Your System
Decide on the location and position of the system before making any connections.
Soundbar Location
Place the soundbar on a table surface or shelf near the
television, or wall-mount the soundbar above or below
the television.
Keyhole mounts on the rear of the
soundbar permit wall mounting.*
Wall-Mounting
The TVee 26 soundbar can be wall-mounted using the integrated keyhole mounts. A mounting template can be found in
the product carton. Using a level tool, position and tape the template to the wall in the desired location.
Install hardware* using the template as a guide and then remove the mounting template from the wall. Connect your audio
and power cables prior to mounting the soundbar on the wall.
*Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker. Usually it is
best to leave soundbar off the wall until connections are made.
SUBWOOFER
VOLUME
PAIR
22
here and plug the other end into an AC outlet.
17 18
22
SUBWOOFER
VOLUME
PAIR
19 20 21
5