Vortice VORT HRW 20 MONO Instrucciones Para El Instalador página 6

ENGLISH
Vort HRW 20 HCS
5 5
This model features a relative humidity sensing circuit that is
factory set at 70%; when relative humidity exceeds this value,
the appliance starts automatically.
The installer can choose from 4 alternative values for the hu-
midity threshold (using the slide-switch shown in fig.41):
60%, 70%, 80%, 90%.
When the sensor starts the appliance it runs in extractor
mode at maximum speed until room humidity level falls below
the threshold value. Once humidity is below the threshold
value the appliance resumes its previous operating mode.
The sensor is active also when the appliance is on stand-by,
.
i.e. with the speed selector set to 0
6