Model 4136 - Kenmore 796.4136 Manual De Uso Y Cuidado

HOW TO USE
OPTIONS (Model 4136*)
Your washing machine features several additional cycle
options that customize cycles to meet your individual
needs.
1
Turn ON the washer and turn the cycle selector
knob to select the desired cycle.
2
Use the cycle modifier buttons to adjust the settings
for that cycle.
3
Press the cycle option button(s) for the option(s) you
would like to add. The button will light when that
option is selected. For secondary functions, press
and hold the button for three seconds. The LED will
blink when the secondary option is selected. Both
options cannot be selected together.
4
If the selected option is not allowed for the selected
cycle, the chime will sound twice to alert you and
the LED will not illuminate.
5
Press the START/PAUSE button to start the cycle. After a
brief delay, the door will lock and the cycle will begin.
NOTE: To protect your garments, not every option is
available with every cycle.
NOTE: If the START/PAUSE button is not pressed within 60
minutes, the control will shut off and the settings will be lost.
PRE WASH
Select this option to add a 15-minute
prewash, rinse and spin cycle to the chosen
cycle. This is especially useful for heavily
soiled items.
EXTRA RINSE
This option will add an extra rinse to the
selected cycle. Use this option to help
ensure the removal of detergent or bleach
residue from fabrics.
STAY FRESH
This feature helps keep wrinkles from setting
in clothes and helps keep them fresh if they
are not removed from the washer as soon as
the cycle is complete. Press the STAY FRESH
button to tumble the clothes intermittently and circulate
fresh air through the drum for up to 19 hours. Press the
POWER button or the START/PAUSE button to remove
clothes at any time.
ADD GARMENTS
Use this function to add garments or
remove foreign objects like coins or keys
after the cycle has started.
1
Press the ADD GARMENTS button. The cycle pauses
and the door unlocks.
2
Open the door, add garments or remove foreign
objects, and close the door.
3
Press START/PAUSE to restart the cycle. The cycle
continues automatically.
NOTE:
• After checking the water level/temperature conditions
for safety, the door unlocks once the wash movement
has stopped. (Door Lock LED turns off.)
- This may take several seconds depending on the
water level. When a lot of water is in the tub, the
door unlocks after water drains to a safe level.
- If the temperature in the tub is higher than 113°F
(45°C), a short warning chime sounds and ADD
GARMENTS is NOT allowed for safety.
• ADD GARMENTS is disabled during the CLEAN
WASHER cycle for safety.
• To preserve wash performance, wash time may be
extended depending on when garments are added to a
cycle.
WARNING:
• Be careful when opening the door as wet laundry may
drip or fall out when the door is opened.
• Do not attempt to force the door to open when locked.
Doing so could result in damage to the machine,
malfunction, or personal injury.
• Make sure the area around the door seal is clear before
closing the door. If laundry gets caught between the
door and the seal, it can damage the rubber gasket
and may result in leaking.
34