Cleaning The Drain Pump Filter - Kenmore 796.4126 Serie Manual De Uso

CARE AND CLEANING
MAINTENANCE (continued)

Cleaning the Drain Pump Filter

The washer is equipped with a filter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from causing
damage to the pump. If the washer fails to drain properly,
unplug the washer and allow the water to cool, if necessary,
before proceeding.
1
Open the drain pump filter access panel.
Drain Hose
2
Unclip the drain hose and pull it out. Place the end
of the drain hose into a shallow pan or a floor
drain. Make sure not to pull the hose out too far, or
it may not drain properly.
Plug
3
Remove the plug from the drain hose, and allow the
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
4
Twist the pump filter counterclockwise to remove.
Remove any lint and foreign objects from the pump
filter. Insert pump filter back into opening and twist
clockwise to secure. Be sure to close the drain pump
filter access panel.
26
Pump Filter